Guard Chairs
  • Paragon Aquatics

  • Spectrum Products

  • Tailwind

  • Griff's Guard Stations

    Griff chair

    Griff's Guard Stations feature front entry, elevated viewing station, easy access, and non-skid surface. A wide front step provides additional station and brings the guard closer to the pool edge. Heavy duty wheels allow convenient, easy portability. Stainless steel and fiberglass construction assures long lasting and trouble free service.

    Brochure

  • Permanent Paraflyte Chairs

    ParaFlyte2

    All Paraflyte chairs are supported by a stainless steel flanged pedestal which is set back 3'0" from the pool wall. All platforms are constructed of laminated wood, coated with fiberglass and polyester resin and have a non-skid surface. All Paraflyte lifeguard chairs are furnished with pedestal, pedestal anchor, rear anchors (where required) and escutcheon plates. All are furnished with holders for rescue tube and umbrella.

    Brochure

  • Movable & Portable Chairs

    Movable2

    Moveable chairs are an ideal solution for a chair that is needed at different locations. Both rugged and stable, yet can be easily moved by one person. The heavy duty 7" diameter wheels roll easily on deck or lawn. The perfect chair for supervision, instruction, and judging. The Portable chairs are for areas not requiring a full height chair. Light enough to be easily lifted by one person, with a sloping front ladder that allows access to a molded contour seat. The back angled legs add stability. Not recommended for use with umbrellas under windy conditions or for diving.

    Brochure

  • Lookout Family

    Lookout chair

    Lookout chairs have a roomier, non-skid surface platform. The stand is at a low height to allow for a faster dismount. These chairs can be placed closer to the pool edge for circumstances where space is a consideration. All lookout chairs offer an elevated, 360 degree swivel seat. All models come with an umbrella holder and the 3-step also has a rescue tube holder.

    Brochure

All lifeguard chairs utilize non-slip foot boards, molded ladder treads, stainless steel life ring buoy holders, stainless steel umbrella mounting brackets and a commercial grade guard seat.

Family Brochure

  • Torrey II

    Torrey chair

     

    The Torrey II is readily moveable and enables the lifeguard a rapid exit while maintaining an excellent line of site. It also eliminates the hazards associated with elevated platforms. It includes a removable fold down seat that is a close cell, UV protected, foam padded seat with 360 degree swivel capacity.

  • Discovery

    Discovery chair

    This lightweight yet sturdy portable unit enables the lifeguard to oversee any area of the pool in seconds. The optional Ballast Systems provide stability to portable platforms. It includes a removable fold down seat that is a close cell, UV protected, foam padded seat with 360 degree swivel capacity.

  • Mendota

    Mendotta chair

    The Mendota portable lifeguard chairs are made of recycled high-density polyethylene material with density polyethylene material with colorants and UV inhibitors. They are shipped with minimal assembly required - 80% factory assembled. They are resistant to corrosive substances, oil, insects, fungi, salt spray, rust and other environmental stresses. They do not absorb moisture and will not rot, splinter or crack. Available in white only.

  • Marshall

    Marshall chair

    The Marshall can be used for life guarding, judging, coaching or instructing. This lightweight, yet sturdy, platform is easy to transport. It includes a removable fold down seat that is a close cell, UV protected, foam padded seat and two standard 6" diameter wheels for easy transportation. The optional Ballast Systems provide stability to portable platforms.

  • Sapphire

    Sapphire chair

    This space saving design enables minimal setback and is ideal for rollout gutter pools. It includes a removable fold down seat that is a close cell, UV protected, foam padded seat with 360 degree swivel capacity. It is a permanent chair with a steel "J" bolt anchor with stainless steel construction.

All Tailwind Lifegueard chairs come complete with cup & umbrella holders (umbrella holder has a 1 5/8" diameter opening). Umbrella is not included.

  • LG500

    LG5001

    30"L x 29"W x 51"H

    Seat height is 30"

    Made from Recylced Plastics

    Ships UPS

    Some assembly required

  • LG505

    LG5051

    33"L x 29"W x 51"H

    Seat height is 30"

    Made from Recylced Plastics

    Ships UPS

    Some assembly required

  • LG510

    LG5101

    41"L x 30"W x 61"H

    Seat height is 40"

    Made from Recylced Plastics

    Ships UPS

    Some assembly required

  • LG515

    LG5151

    43"L x 30"W x 70"H

    Seat height is 50"

    Made from Recylced Plastics

    Ships Freight truck

    Some assembly required

  • LG520

    LG5201

    48"L x 59"W x 70"H

    Seat height is 50"

    Platform height is 33"

    Made from Recylced Plastics

    Ships Freight truck

    Some assembly required

  • LG525

    LG5251

    62"L x 59"W x 70"H

    Seat height is 50"

    Platform height is 33"

    Made from Recylced Plastics

    Ships Freight truck

    Some assembly required